Moonworkers
Blog

IR35 small company exemption: how the size test works

How the IR35 small company exemption works: the Companies Act size tests, the raised thresholds, groups, timing rules and who decides status for small clients.

IR35 small company exemption: how the size test works

Work out your take-home pay

Income tax, National Insurance and net pay for any UK salary, 2026-27.

This article was written with the help of AI.

The 2021 extension of the off-payroll working rules to private and voluntary sector clients affected around 120,000 workers and generated around £4.2 billion in additional tax up to March 2023, according to HMRC's own evaluation [1]. One test decides whether a private sector client is inside that regime at all: whether it is small under the Companies Act 2006, which means meeting two of three limits, including no more than 50 employees [2].

That test is usually called the IR35 small company exemption. A small private sector client does not make status determinations, does not issue status determination statements and does not become liable for the tax if status is wrong [3]. The responsibility stays with the worker's own intermediary, as it did for every private sector engagement before 6 April 2021 [4].

The thresholds behind the test rose for financial years beginning on or after 6 April 2025, which moves a band of growing businesses back into the small category [5]. The timing of that change, the group rules and the treatment of partnerships and overseas clients are where most errors arise. This guide explains each element, sets out who decides status on each side of the line, and shows what a caught engagement looks like on payroll.

Key takeaways

  • A private sector company is small for off-payroll purposes when the small companies regime of the Companies Act 2006 applies to it for its last relevant financial year [6].
  • For financial years beginning on or after 6 April 2025, the small limits are turnover of not more than £15 million, a balance sheet total of not more than £7.5 million and not more than 50 employees, with two of the three required [2] [5].
  • HMRC states the raised thresholds have no practical effect on off-payroll working until 6 April 2027 at the earliest, because size is measured on earlier years [7].
  • A subsidiary of a medium or large parent is never small for these purposes, whatever its own size [8].
  • Public sector clients apply the rules regardless of size, and clients wholly based overseas are outside them [3] [9].
  • A small client asked to confirm its size has 45 days to answer [10].

What the small company exemption is

The off-payroll working rules exist so that a worker who would be an employee if engaged directly pays broadly the same tax and National Insurance as an employee, even when the work is supplied through a personal service company [11]. Two different regimes deliver that result. Chapter 8 of Part 2 of the Income Tax (Earnings and Pensions) Act 2003 puts the decision on the worker's intermediary, while Chapter 10 puts it on the client and moves the tax liability down the contractual chain [12].

The small company exemption is the switch between the two. HMRC's manual puts it plainly: small non-public sector organisations do not need to consider the rules [9]. When the client is small, Chapter 10 does not apply to the engagement and the worker's intermediary applies Chapter 8 instead [4].

Why the exemption exists

When the reform was announced, the government estimated it would affect around 180,000 individuals working through their own company, and that up to 60,000 client organisations outside the public sector would be in scope [13]. The same policy paper confirmed that engagements with small client organisations outside the public sector are exempt, so that the administrative work of status determinations would fall only on organisations with the resources to do it [13].

The reform has changed how contractors are engaged. HMRC's evaluation estimates that around 45,000 fewer new personal service companies were formed around the time of the reform, and that many workers moved to umbrella companies and agencies [1]. For a contractor whose client is small, none of that client-side machinery applies, and the familiar pre-2021 position continues [11].

Which intermediaries the rules cover

The exemption only matters when the worker supplies services through an intermediary that meets the Chapter 10 conditions. For a company, the usual condition is that the worker has a material interest, meaning more than 5% of the shares, distributions or entitlement on a winding-up [14]. A worker with an interest of 5% or less can still be caught where other conditions are met, and a targeted anti-avoidance rule applies where arrangements are designed to circumvent those conditions [15].

Where a worker could fall within both the managed service company legislation and Chapter 10, HMRC's guidance states that Chapter 10 takes precedence [16]. That precedence only arises when the client is public sector or medium or large, which is why the size test is the first question in any off-payroll review [9].

The size test for companies

Section 60A of ITEPA 2003 sets the test for companies. A company qualifies as small for a tax year if its first financial year is not yet relevant to that tax year, or if the small companies regime applies to it for its last financial year that is relevant to the tax year [6]. The section contains no figures of its own: its expressions take their meaning from the Companies Act 2006, so the company law thresholds flow straight into the tax test [6] [2].

The three Companies Act limits

Section 382 of the Companies Act 2006 treats a company as small when it satisfies two or more of three requirements [2]. The Companies (Accounts and Reports) (Amendment and Transitional Provision) Regulations 2024 raised two of them for financial years beginning on or after 6 April 2025 [5].

RequirementSmall limit, financial years beginning on or after 6 April 2025Limit for earlier financial years
TurnoverNot more than £15 millionPreviously not more than £10.2 million
Balance sheet totalNot more than £7.5 millionPreviously not more than £5.1 million
Average number of employeesNot more than 50Unchanged

The figures in the table come from the amended section 382 and the 2024 Regulations [2] [5]. HMRC confirms the change in its Employment Status Manual and notes that the employee limit did not move [17].

How each limit is measured

The balance sheet total is the aggregate of the company's assets, before any liabilities are deducted, and the employee figure is a monthly average of people employed under contracts of service [2]. HMRC's guidance adds that only staff the company employs directly count: contractors supplied through intermediaries or agencies do not [9].

A company that exceeds two limits is not immediately medium-sized. Under the Companies Act, a change of size takes effect only when the company meets or fails the conditions in two consecutive financial years, which HMRC reflects in its description of the test [9] [2]. A single strong year does not, on its own, bring a growing client into Chapter 10.

Which year is measured

The financial year that counts is the last one whose accounts filing deadline ended before the start of the tax year in question [6]. This look-back means a client's size for a tax year is fixed before that tax year begins, and stays fixed for the whole of it [8].

New companies have their own rule. A company is treated as small in its first financial year, even when it belongs to a group, until the first tax year that starts after the filing period for that first year ends [9] [6].

When the raised thresholds take effect

Because size is measured on earlier financial years, a threshold change in company law takes time to reach the off-payroll rules. The April 2025 Employer Bulletin states that the changes will have no practical impact for off-payroll working until 6 April 2027 at the earliest [7]. HMRC's manual reaches the same conclusion for a company with a usual 12-month financial year, identifying the 2027 to 2028 tax year as the earliest affected [17].

A worked timing example

The sequence below follows HMRC's reasoning for a private company with a 12-month financial year starting on 6 April 2025, the earliest start date the new thresholds can apply to [5] [17].

StepDateEffect
Financial year begins6 April 2025First year assessed against the raised limits
Financial year ends5 April 2026Accounts prepared on the new thresholds
Filing period ends5 January 2027The year becomes relevant to tax years starting after this date
First tax year affectedBegins 6 April 2027The client may be small for off-payroll purposes

The 2024 Regulations also contain a transitional provision that lets the size test look back to the previous financial year using the new limits, which helps a company satisfy the two-year rule sooner [5] [17]. A company with a shortened or non-standard accounting period should work through its own dates rather than rely on the 12-month example.

Guidance pages that still show the old figures

Several HMRC pages have not caught up with the change. The client guidance page still describes a company as medium or large with an annual turnover of more than £10.2 million [3], and parts of the Employment Status Manual still show the earlier limits in their body text [9]. The legislation is what governs, and section 382 now shows £15 million and £7.5 million [2]. For financial years that began before 6 April 2025, the previous figures still apply, so both sets remain relevant for some time [17].

Groups, joint ventures and connected persons

Size is not always measured at the level of the company receiving the services. The group rules are where the exemption most often fails for clients that look small on their own accounts.

The parent decides

HMRC states that a group's size is determined by the size of its parent company, aggregating all group members, irrespective of whether they are resident in the UK [8]. Section 60C of ITEPA 2003 provides that a subsidiary is not small where its parent does not qualify as small [18]. A 20-person UK subsidiary of a large international group therefore applies Chapter 10 in full.

The group member that receives the services is the one that makes the status determination [8]. A company acquired during a tax year takes the parent's size, and the position is reconsidered each tax year [8] [3].

Joint ventures and connected persons

A jointly controlled company where one or more of the controlling parties is an undertaking takes its size from that undertaking's parent, following the group rules [19]. Outside groups, section 60G aggregates turnover with that of connected persons, so splitting a business across several entities does not, by itself, keep each one small [20].

HMRC's manual illustrates the connected persons rule with partners and spouses running separate businesses [21]. Group members are treated as not connected with each other for this purpose, because the parent-based group test already covers them [20].

Partnerships, LLPs, charities and overseas clients

The test changes with the legal form of the client. Section 60D applies the company test to limited liability partnerships, unregistered companies and overseas companies, with any necessary modifications [22]. Section 60E sets a separate test for other undertakings, such as ordinary partnerships [23].

Client typeTest that appliesYear measured
Company, LLP, overseas or unregistered companyTwo of three Companies Act limitsLast financial year whose filing period ended before the tax year
Other undertaking, such as a partnershipTurnover only, against the section 382 turnover limitFinancial year ending at least 9 months before the tax year
Group memberSize of the parent, aggregating the whole groupParent's relevant year
Public authorityRules always applyNot relevant
Client wholly overseasRules do not applyNot relevant

The table summarises sections 60A to 60E and HMRC's guidance on clients [6] [23] [3].

Non-company undertakings

For an undertaking that is neither a company nor an LLP, the only test is turnover: it is small if turnover for its last relevant financial year is not more than the amount for the time being specified in section 382(3) [23]. Because the section points to the current Companies Act figure rather than a fixed amount, the raised turnover limit carries through automatically [23] [2]. Turnover is measured after trade discounts and VAT [23].

Charities, public bodies and overseas clients

Charities ignore donations when measuring turnover, which keeps many grant-funded organisations small even with large incomes [9]. Public authorities have no exemption at all: the rules apply to every public sector engagement, and a company connected with a public authority is itself treated as one [24] [3].

A client with no UK residence and no UK permanent establishment immediately before the tax year is wholly overseas, and Chapter 10 does not apply to it [9]. HMRC's client guidance confirms the same exclusion [3].

Confirming size and who decides status

A contractor's intermediary needs to know which regime applies before it can decide whether to operate PAYE. The legislation gives it a formal way to ask.

The 45-day size confirmation

Under section 60H of ITEPA 2003, the worker or intermediary can ask the client to confirm whether it is small for a specified tax year [10]. The client has 45 days from receiving the request to respond, or until 45 days before the start of the tax year if that is later, and the request must refer to the off-payroll rules and name the tax year [10].

HMRC publishes template wording, under which a small client confirms that it is small for the tax year as defined at section 60A [25]. A client that fails to answer can face an application for an injunction, or specific performance in Scotland [10]. This 45-day duty is separate from the 45-day period a medium or large client has to answer a status disagreement [26].

Small client versus medium or large client

The size answer moves every downstream responsibility. The comparison below draws on HMRC's guidance for clients, for intermediaries working with small clients and for deemed employers [3] [4] [27].

ResponsibilitySmall private sector clientMedium or large client, or public sector
Who decides statusThe worker's intermediary (Chapter 8)The client (Chapter 10)
Status determination statementNot requiredRequired, with reasons and reasonable care
Who operates PAYE if caughtThe intermediary, through a deemed employment paymentThe deemed employer, usually the party paying the intermediary
Who carries the liabilityThe intermediaryMoves down the chain, back to the client if the SDS fails
Disagreement processNot applicableClient must respond within 45 days

A valid status determination statement must state the conclusion, give reasons and show reasonable care, and HMRC's criteria are covered in detail in the Moonworkers guide to the status determination statement [28].

What the intermediary does when the client is small

When the client is small, the intermediary decides whether the engagement would be employment if the worker were engaged directly [4]. If it would, the intermediary calculates a deemed employment payment and reports it through a Full Payment Submission on or before 5 April each year, with a P60 to the worker by 31 May after the tax year ends [4]. Final figures can follow by 31 January, with interest but no late payment penalty [4] [11].

Accountants who run payroll for contractor companies need this year-end calculation built into the scheme. A multi-client payroll dashboard that holds the deemed payment alongside the director's normal salary keeps the FPS and the P60 consistent. The wider background on both chapters is in the Moonworkers guide to IR35 and the off-payroll rules.

What changes on payroll when the exemption does not apply

When the client is medium or large and the SDS says the rules apply, the deemed employer deducts income tax and employee National Insurance from the deemed direct payment, pays employer National Insurance on top and reports the payment through RTI with the off-payroll indicator [27]. The deemed direct payment is the fee less VAT, less direct costs of materials and less certain intermediary expenses [27].

A worked example on a monthly deemed payment

A medium-sized client engages a contractor whose deemed direct payment is £5,000 for a month, on tax code 1257L and National Insurance category A. The Moonworkers payroll engine calculates income tax of £952.06 and employee National Insurance of £267.50, leaving £3,780.44 to pass to the intermediary. Employer National Insurance of £687.45 is due on top and cannot be deducted from the payment [27]. Employer contributions run at 15% above the secondary threshold of £5,000 a year [29].

Line on the deemed paymentAmount, monthly
Deemed direct payment£5,000.00
Income tax deducted£952.06
Employee National Insurance deducted£267.50
Net paid to the intermediary£3,780.44
Employer National Insurance, paid by the deemed employer£687.45

Deductions that do not apply

Two items that apply to ordinary employees are excluded. The deemed employer makes no student loan or postgraduate loan deductions from a deemed direct payment, and Employment Allowance cannot be set against employer contributions on these payments [27]. The worker settles any loan repayments through Self Assessment instead [11].

Getting those exclusions right is a payroll configuration question rather than a status question. HMRC-recognised UK payroll software that flags off-payroll workers at the employee record level applies the indicator, suppresses loan deductions and keeps the employer contributions out of the Employment Allowance claim. For platforms that run contractor payments inside their own product, the HMRC-recognised payroll API exposes the same controls, so the off-payroll logic lives in the compliance engine rather than in custom code. The mechanics of employer contributions are set out in the guide to employer National Insurance.

Model the cost of an inside IR35 engagement

The Moonworkers UK salary calculator applies the 2026-27 PAYE and National Insurance rules to any gross figure, which gives clients and agencies a quick view of the tax and employer contributions on a deemed direct payment.

£ per month

£

e.g. 1257L, S1257L, BR, D0

S = Scotland · C = Wales · W1/M1 = non-cumulative

Enter a salary or hourly rate above

About this calculator

This calculator gives you a close estimate of your UK payroll deductions for 2026-27, using HMRC's exact percentage method with periodised thresholds. It handles the three tax territories, K codes with the 50% regulatory limit and its carry-forward, weeks 53, 54 and 56, the cumulative and W1/M1/X bases, student and postgraduate loans, and pension contributions on qualifying earnings. It still won't match your payslip to the penny in every case: it does not cover in-year tax code changes, payrolled benefits in kind, NI deferral across more than one employment, directors on the annual earnings period, or employer-level annual adjustments such as the Employment Allowance and the apprenticeship levy. Powered by the same engine as the Moonworkers Payroll API.

Run real payroll

Frequently asked questions

Why might the result differ from my payslip?

This calculator uses your current gross pay and tax code to produce an estimate. K-code carry-forwards and weeks 53, 54 and 56 are handled, and the Year-to-date section reproduces a specific period exactly. What your employer may apply that this does not: a mid-year tax code change, benefits in kind processed through payroll, or NI deferral across more than one employment. For most employees on a standard tax code the difference is negligible.

What tax code should I enter?

Use the tax code shown on your most recent payslip or the PAYE Coding Notice (P2) from HMRC. If you're not sure, 1257L is the standard code for most employees resident in England, Wales, or Northern Ireland. Use S1257L for Scotland or C1257L for Wales if you pay Scottish or Welsh income tax.

Which NI category applies to me?

Most employees use Category A. Use M if you are under 21, H if you are an apprentice under 25, or C if you are over State Pension age. Your employer is responsible for assigning the correct category. If in doubt, check your payslip.

Which student loan plan am I on?

Your plan depends on when and where you studied. Plan 1 covers students who started before September 2012. Plan 2 is for English and Welsh students who started from September 2012 to July 2023. Plan 5 applies to English students who started from August 2023. Plan 4 covers Scottish students. You can check your plan at gov.uk or on your payslip.

What is the YTD cumulative PAYE mode?

HMRC's standard method calculates income tax on your total earnings to date each period, then subtracts tax already paid. If you're mid-year and want to see exactly what tax should be deducted in a specific period, expand the Year-to-date section and enter your running totals from previous periods only.

Conclusion

The small company exemption is a single line in the legislation with a long reach. It decides whether a client makes status determinations, whether an SDS exists, who operates PAYE and who pays when the answer is wrong. Because section 60A borrows the Companies Act definitions, every change to company law thresholds eventually reaches the off-payroll rules, but only after the look-back and the two-year rule have worked through [6].

The raised limits will move a set of growing private companies back into the small category from 6 April 2027 at the earliest, and with them, a share of contractor engagements back to the intermediary [7]. Clients, agencies and bureaux that record each client's size, relevant year and group position as structured data, rather than as an annual email, will handle that transition with the least disruption.

Frequently asked questions

Does IR35 apply if the client has fewer than 50 employees?

Not necessarily. A company is small when it meets two of three limits: turnover, balance sheet total and an average of not more than 50 employees. A company with fewer than 50 staff but turnover and balance sheet both above the limits is still medium-sized, and it must apply the off-payroll rules [2]. A subsidiary of a large group is also caught regardless of headcount [8].

When do the new £15 million and £7.5 million thresholds apply to IR35?

The raised limits apply to financial years beginning on or after 6 April 2025. Because the off-payroll test looks at a financial year whose filing deadline has already passed, HMRC states that the change has no practical effect until 6 April 2027 at the earliest [7]. Companies with non-standard accounting periods should check their own dates [17].

Who decides IR35 status when the client is a small company?

The worker's own intermediary, usually a personal service company, decides whether the engagement would be employment if the worker were engaged directly. If it would, the intermediary calculates a deemed employment payment and operates PAYE on it [4]. The client does not issue a status determination statement [25].

Does the small company exemption apply to public sector clients?

No. Public authorities must apply the off-payroll rules to every engagement, whatever their size, and a company connected with a public authority is treated as a public authority itself [24]. The exemption is only available to private and voluntary sector clients [3].